Estimated reading time: 10 minutes

The three B’s: beans, bullets, and bandages. This has been the motto of preppers for a long time. There is nothing wrong with it as it covers the necessities for food, security, and first aid.

These items are needed for short and long-term survival, but for something more serious, say a total collapse of the system, you must look beyond the three B’s. There’s one aspect of preparedness that often gets overlooked: At some point, you’re going to have to fix and rebuild things, which means you’ll need tools.

The purpose of this article is to take a look at some of the tools you’ll need to be self-sufficient after a collapse where there are no stores or supply chains to rely on. To take this a step further, I’ll be focusing on tools that don’t require any electricity or fuel.

To make things easier, I’ll be breaking the tools down into a few different sections. The list of tools I’m recommending is by no means a complete list of all the available options, but the items I’ll suggest are basic enough to get you by, and the list will give you a baseline to start from.

Water Requirements

First things first. You are not going to get very far or get much work done if you don’t have any clean water.

The basic tools required for your water needs include water filters, so that you can filter water, collection containers, transport containers for clean or dirty water, storage containers, a heating source so that you can purify the water through boiling, and a cart for moving all that water where you need it to because one gallon of water weighs just over eight pounds.

Processing Wood

Axe

A good felling axe is sharp and designed for bringing down trees as well as processing trees into more manageable logs.

Drawknife

A drawknife is a knife with two handles on either side of a blade and this tool helps to remove unwanted material from a piece of wood and in shaping the wood.

Folding Saw

A folding saw is a compact and lightweight option for when you will be on the move.

Hatchet

Hatchets are compact, and lightweight and are great for small wood processing jobs and clearing trails.

Maul

Splitting mauls are heavy hitters and are used for splitting larger pieces of wood down into smaller pieces.

Tomahawk

A true tomahawk is a multitool that can be used for small wood processing tasks, processing game, and self-defense.

Wedges and Sledges

Wedges and sledges can be used to help bring a tree down with preexisting cuts or they can be used to split large logs that are already on the ground.

Wood Saw

A wood saw can be safer and easier to use than an axe and they give you the ability to make precision cuts. You can use a two-man crosscut saw or a bow saw for smaller logs and branches.

Gardening

You’re probably not going to be worried about what your yard looks like after a collapse in terms of growing roses and having neatly trimmed grass.

But for whatever reason, there may need to be some yard work down, especially if you intend on growing a food garden. Basic tools such as a shovel, leaf rakes, hard rakes, hoe, trowel, pruning shears, or a lopper will help you to get done what you need in the garden and around the yard.

Building and Fixing

Allen wrenches

Quite a bit of hardware used today requires the use of allen style wrenches.

Chisels

Chisels allow you to shape or remove wood in a precise manner.

Clamps and Vice

Clamps are generally small portable tools for holding one or more objects securely in place. A vice does the same job but it is generally more heavy-duty and is fixed in position, like to a workbench.

Demo

Prybars, sledgehammers, and wrecking bars are useful for taking things apart and for demolition purposes.

Files

Metal files are used for removing metal and smoothing out a surface. They can be used on project materials or for sharpening your tools. Rasps are similar but they are used on wood.

Hammers

You’ll need a good claw hammer for driving nails and removing nails and it can be used for light-duty impact tasks as well. For heavier-duty impact jobs you will need a sledge hammer. For jobs that require some force with a reduced chance of damaging the work surface, use a rubber mallet.

Manual Drill

When building, fixing, or retrofitting something, it’s often the case that you will need to make some holes in the material. A manual drill such as this rotary drill by Stanley or this bit and brace will allow you to drill precision holes without the need for electricity.

Measuring Tape

A measuring tape will allow you to make quick and accurate measurements.

Metal Cutters

If you are going to be working with metal at some point, you are going to want a few different types of cutting tools. A hack saw will help you get through pipes, sheets, and hardware. Wire cutters will help you get through small-diameter metal, bolt cutters for larger-diameter metal, and tin snips for softer sheets.

Pliers and Channel Locks

Pliers and channel locks provide you with the extra grip you need when tightening, loosening, or just needing to hold onto an object.

Precision tools

When working on something that has very small components, a precision screwdriver set, and a hook set will come in handy.

Screwdrivers

You’ll need an array of different types and sizes of screwdrivers for tightening and loosening hardware. Screwdriver sets with fixed shafts are probably the best option as they are the most durable.

However, ratcheting screwdrivers are convenient because they are much more compact and can use a variety of different bits.

Sharpening Stone

A sharpening stone will help to keep a good edge on your edged tools.

Sockets

Sockets are also used for tightening and loosening hardware such as bolts and nuts but can be much quicker to use.

Square

A square can help you make straight cuts and will help ensure that the material you are working on is properly lined up.

Wood Saw

Wood saws give you the ability to make precision cuts in wood to create the building blocks of your project.

Wrenches

Fixed wrenches or adjustable wrenches are used for loosening and tightening hardware, such as bolts and nuts.

Miscellaneous

Plastic sheeting and duct tape have a ton of different uses, especially in performing temporary repairs.

Adhesives such as epoxies, glues, and caulks are consumables but are incredibly useful for sealing and bonding materials together.

Food

While this section doesn’t have anything to do with rebuilding, you are going to need a lot of energy to do that work and that means acquiring food or growing it. A firearm will be the easiest and most used method first for most people but you better have a TON of ammunition stored up or reloading supplies if you intend on using a firearm for a long time.

Hunting

Bow

A bow is another useful hunting tool that can be used to acquire food from land, sea, or air. Again, should certain parts break, like the string or arrows, they can be readily improvised. If you are looking for something more compact and “survival” related, check out this bow by SAS.

Cleaning Knives

Once you have gotten yourself some wild game or fish you will need to be able to clean it and process it. A set of game-cleaning knives will provide you with everything you will need.

Slingshot

A slingshot is a great tool for hunting because it can use a variety of ammunition, it’s compact and lightweight, and parts of it can easily be improvised should anything break.

Trapping

Trapping is another energy-efficient way to acquire wild game while you are getting other work done. Live traps are easy to set up and use and snares can easily be made from wire or cordage such as paracord.

Fishing

Fishing is usually an energy-efficient way of getting food. It’s my recommendation that you forget all the fancy gear and gadgets and stick with the basics. All you really need is some simple tackle, and fishing line to catch a fish.

But if you would like a rod check out this Telescopic rod or this compact and lightweight handheld Ka-Bar Backpacker Caster

Kitchen

An army marches on its stomach and when you have work to do, you don’t want food preparation to be any more difficult than it needs to be. Kitchens are full of tools but I’m going to focus on a fairly short list of basic items that will help out when it is time to cook!

Cast Iron Cook Set

In my opinion, a lot of modern cookware is junk because it can only be used indoors, it only lasts a few years if you are lucky, or it contains harmful elements. You can avoid all of this by getting yourself some cast iron cookware, which can be used indoors and outdoors and you can hand it down through generations.

Canning Supplies

After all that work of growing your food after the collapse, you might find out that it would be nice to be able to save any excess for a later date. Grab yourself some canning supplies so that not one morsel goes to waste.

Grater

A handheld grater makes short work of processing most types of foods into smaller pieces. A four-sided grater gives you multiple size options and it can help out in preparing a good meal.

Knives

A quality set of knives is worth its weight in gold when it comes to food preparation and they are the foundation of any kitchen.

Manual Can Opener

What can I say? Most people store canned goods in their pantries and you are going to need an easy way to get into them. A manual can opener, actually several manual can openers, should be in every kitchen.

Manual Grain Grinder

A manual grain is a must for anyone growing or storing grain who wants to process that grain later.

Manual Meat Grinder

A manual meat grinder is another grinder that most people should consider getting if they plan on processing and eating a fair amount of meat.

Mesh Strainer

Rather than getting a larger, traditional strainer, I prefer these mesh screen types of strainers because they can also be used for sifting and separating certain materials.

Sharpening Stone

If you purchase a full knife block set they often come with a sharpener, but if they don’t come with one, be sure to get a sharpening stone to keep those edges honed.

Further Research

If you are looking for some more ideas on what simple tools you should have or “old school” ways of making stuff, then I highly suggest checking out videos on YouTube by Townsends.

They concentrate on aspects of 18th century living and they provide a lot of fantastic information on the topic. When watching their techniques keep modern materials in mind that could be substituted. Below I have picked out a few of their videos on the topics of tools and building.

You May Also Like: